Craftsman 247.770990 Operator's Manual page 8

f-
Upper
Bracket
Lower
Hose
Handle
Bracket
Hose
Handle
Hose
6. a. Snapthe hosehandlefirst intothe upper hosehandlebracket
and then intothe lowerhosehandle bracket.
b. Layhosetubingon hangerbracketnextto chipperchute.See
Figure6.
ATTACHING THE BAG
7. Graspbag handlewith one handand slide lockingrod on mounting
bracketwith otherhandtowardengine.Usethe end of mounting
bracketas leveragewhenslidingthe lockingrod.
a. Slipbag over therim of the dischargeopeningand release
lockingrod to securebag in place.See Figure7.
b. Snapbag clip to the topof the lowerhandle.
c. Placethe lowerstrapson the bag overthe topof lowerhandle,
hookingthemon the studs.See Figure7.
Hangar
Bracket
Figure 6
NOTE:The bag/chuteswitch buttonattachedto the mountingbracket
mustbe fully depressedby thetip of front tabon bag handlewhen
securingthe bag or enginewill not start.
\
Bag
Clip
Strap
Figure 7
8