Workgroup Mode And Lan-To-Lan Example - Enterasys 802.11 Networking Manual

RoamAbout R2 Configuration Examples

Workgroup Mode and LAN-to-LAN Example

Figure 1-7 shows two RoamAbout R2s in different buildings using an outdoor directional
antenna to connect the LANs in those buildings. Each RoamAbout R2 contains two radio
slots; one slot configured in Workgroup mode, and one slot configured in LAN-to-LAN
Endpoint Bridge mode.
In addition, a RoamAbout R2 can be configured for multipoint mode (slot 1 only), connect
to an omni-directional antenna, and connect to other APs.
Figure 1-7: Workgroup and LAN-to-LAN Endpoint Configuration
1-14