Craftsman 113.232210 Owner's Manual page 19

4. Slide the belt guard over the rod and attach it to the
base of the jointer with two 2-3/4" long Pan. Hd.
screws. Make sure the belt does not scrape the
guard.
O
BE_
GUARD
j-
2-3/4" LONG PAN HD.
SCREW
5. Attach sliding guard to fence with two pa n head WASHER
screws and Iockwashers;_ i _ : _
..... (CONCAVE SIDE UP)
6. Place one Sliding Guard!Washer, concave side
DOWN on support rod. ......
7. Drop sliding guard onto rod .:. place other washer,
concave side UPon rod ;. screw on Sliding Guard
Knob.
LOCKWASHER
WASHER
(CONCAVE SIDE DOWN)
1/4" PAN HD.
SCREW 19