Depth Of Cut Handwheel; On-Off Switch - Craftsman 113.232210 Owner's Manual

,
0N-OFF SWITCH.
The on-off switch is shaped to make turning it "ON"
accidentally less likely.
In an emergency, it can be turned "OFF" by striking
it with the palm of the hand.
The "yellow button" is a key. When it is inserted in
the switch lever, the power may be turned ON and
0FE When it is removed, the power cannot be turned
ON.
THIS FEATURE IS INTENDEDTO HELP PREVENT
UNAUTHORIZED AND POSSIBLE HAZ-
ARDOUS USE BY CHILDREN AND OTHERS,
a. Insert Key into switch. NOTE: Key is made of yellow plastic.
b. To turn the tool on, insert your finger under the
switch lever and pull the end of the switch out.
C,
i ii1_
To turn the tool OFF _.. PUSH the lever in.
Never leave the machine unattended until it has
come to a complete stop.
d, To lock the switch in the OFF position.., hold
the switch IN with one hand ... REMOVE the
key with the other hand.
WARNING: FOR YOUR OWN SAFETY, ALWAYS
LOCK THE SWITCH "OFF" WHEN MACHINE IS NOT
IN USE... REMOVE KEY AND KEEP IT IN A SAFE
PLACE.., ALSO . .. IF THE TOOL STOPS UNEX-
PECTEDLY, TURN SWITCH OFF . . . AND REMOVE
THE KEY. THIS WILL PREVENT THE MACHINE
FROM STARTING UP AGAIN WHEN THE POWER
COMES BACK ON.
21