Canon MultiPass C530 User Manual page 338

The BJcartridge o r
an ink tank may not be installed properly.
Make sure the BJ cartridge and the ink tank(s) are installed properly (see page 7-23 and 7-33).
The MultiPASS may not be operating properly.
Try to print a document from your PC.
MEMORY FULL appears in the LCD display when making multiple copies.
The MultiPASS memory is full.
Print out any faxes stored in memory (see page 5-29), then start again.
The MultiPASS has no power.
The power cord may not be plugged in securely.
Check that the power cord is plugged securely into the unit and into the wall outlet. If the
unit is plugged into a power strip, make sure the power strip is plugged in and turned on.
The power cord may not be supplying power.
Check the power cord by substituting another, or by using a voltmeter to test it for continuity.
Chapter 8 Troubleshooting 8-43