Canon MultiPass C530 User Manual page 239

Receiving Both Faxes and Telephone Calls Automatically: Fax/Tel Mode
Set this mode if you want your MuItiPASS to automatically switch between voice and fax calls. For
this mode, you need to have a telephone connected to your unit.
What Happens When Fax/Tel Mode is Selected
Type of call
[
Telephone charges--
begin for the caller. [
The MultiPASS answers without ringing.
RING START TIME
(Factor?, default
setting = 8 sec.)
T [
F/T RING TIME
The MultiPASS starts ringing.
to receive mode.)
handset to talk.
DEFAULT ACTION
]
Cl .....b .......... / *IDISCONNECT J
RECEIVE (factor?, default setting) and DISCONNECT. I Th_
disconnects the call.
[ (F ac to 2 _ eOkaEl'V1 t_ e tring ) ]
Not all fax machines are capable of sending a fax
tone. For those cases if you set the DEFAULT
ACTION to RECEIVE, the MultiPASS switches to
receive mode automatically and starts receiving
the document. It no document comes in, it
disconnects after approximately 55 seconds.
Chapter 6 Receiving Faxes
6-4