On occasion, the document feeding into the Automatic Document Feeder (ADF) or the paper in
its multi-purpose
tray may misfeed or jam. If this happens, you can usually fix the problem using
one of the following procedures.
You do not need to unplug the MultiPASS while clearing paper jams.
Jams in the Automatic
Document Feeder (ADF)
Use this procedure if the document in the ADF jams or misfeeds. If this occurs, the message
CHECK DOCUEI>CNT appears in the LCD display.
Stop
l.
@
2.
Press Stop.
Open the operation panel by gently pulling it toward you.
It opens only slightly.
Do not try to pull the document out without opening the operation panel or you may
tear or smudge the document.
Chapter 8
Troubleshooting
8-4