Output appears jagged.
The resolution selected via the printer driver may be Draft.
Check your printer driver to see what Print Mode you have selected. Printing in Draft mode
will give the output a jagged look. Changing the Print Mode should correct this problem
(see page 3-8).
Fonts do not print as smoothly rounded characters.
Bitmapped fonts designed for dot matrix printers do not print smoothly rounded characters
when used with high resolution printers like the MultiPASS.
Make sure you installed an outline font manager, such as Adobe ®Type Manager or
Bitstream® Facelift, or that you are choosing a TrueType ® font.
Certain
MS fonts, such as MS Serif, will print
jagged.
Choose another
font.
Output is faint.
You may be using Draft print mode.
Try changing the Print Mode (see page 3-8).
Printing takes too much time.
You may be using Fine mode.
Change Print Quality to Fast (see page 3-11).
Chapter 8
Troubleshooting
8-25