Canon MultiPass C530 User Manual page 238

FAX ONLY MODE
Use this mode if the MultiPASS will be connected to a separate telephone line used only for
faxing. The MultiPASS then answers all calls, and receives all faxes automatically.
ANS.MACHINE MODE
Use this mode if you plan to connect an answering machine to the MultiPASS to receive faxes
and phone messages. The MultiPASS then receives incoming faxes normally, and routes
incoming phone calls to the answering machine.
DRPD
Use this mode if you have subscribed to a Distinctive Ring Pattern Detection (DRPD) service
offered by some telephone companies. By subscribing to such a service, you can have several
fax and telephone numbers for your MultiPASS using only one telephone line.
Receiving Faxes to the MultiPASS Desktop Manager
The MultiPASS Desktop Manager allows you to receive faxes directly to your PC, where they
are stored as scanned images.
Once you have decided which mode you want, set the mode either through the Desktop Manager
(see the online MuttiPASS Desktop Manager Software Guide) or through the operation panel (see
the online Stand-alone Fax Manual). You can change the mode at any time.
Chapter 6 Receiving Faxes 6-3