Brother MFC370MC Service Manual page 22

When setting the recording paper cover on the control panel, first insert the right and left
front corners under sections "X" of the control panel and put the cover into place. Make
sure that the main-panel harness and main-mike harness are routed as shown below.
Control panel
"X"
Boss =Y"
Panel lockarm
Recordingpaper cover
Main-panelharness
Main-mike harness
After securing the recording paper cover with the screws, be sure to route the main-panel
harness and the main-mike harness through the groove provided on the recording paper
cover and then set the panel lock arm to keep those harnesses in place, as illustrated
below.
Boss"Y"
Panel lock arm
L
\
Recording paper cover
Main-panel harness
Main-mike harness
IV - 11