Status Read Command; Format; Transfer Example; Operation Condition - Sanyo PLC-WL2500A Manual

PLC-WL2500A / WL2501A/ WL2503A Expand Serial Command Functional Specifications

9. Status Read Command

9.1

Format

1) PC issues commands in format as below:
"CR_Command" [CR]
Command: Character Line
2) When projector receives the appropriate command, it returns a character line as the
required data
"000ÿ ? "%1 [CR]
%1: Required Data (Character Line. See [Basic Status Read Command Table])
3) When the received data cannot be decoded, the projector returns "?"[CR]
9.2

Transfer Example

Get total dots of projector by Expand Commands
PC → PJ: "CR_TDOTS" [CR]
PC ← PJ: "000_1344" [CR]
9.3

Operation Condition

1) Basically Status Read Commands should be always operated.
2) Status Read Commands are invalid when Eco mode is selected in Standby mode of Setting
menu and projector is in standby
46/72