Cr_Backgnd Command; Cr_Disp Command; Cr_Logo Command; Cr_Ceil Command - Sanyo PLC-WL2500A Manual

PLC-WL2500A / WL2501A/ WL2503A Expand Serial Command Functional Specifications

9.11.4 CR_BACKGND Command

Command
Details
Response

9.11.5 CR_DISP Command

Command "CR_DISP"[CR]
Details Get setting status of Display
Acceptable
Response
Unacceptable

9.11.6 CR_LOGO Command

Command "CR_LOGO"[CR]
Details Get setting status of Logo
Acceptable
Response
Unacceptable

9.11.7 CR_CEIL Command

Command "CR_CEIL" [CR]
Details Get setting status of Ceiling
Acceptable
Response
Unacceptable

9.11.8 CR_REAR Command

Command "CR_REAR" [CR]
Details Get setting status of Rear
Acceptable
Response
Unacceptable
"CR_BACKGND" [CR]
Get setting status of Screen for no signal
Acceptable "000_%1" [CR]
"BLUE" -------------------------------- Blue Back is selected
%1 "USER" ------------------------------- User is selected
"BLACK" ------------------------------ Black Back is selected
Unacceptable "Error Code" [CR]
"000_%a"[CR]
"ON" -------------------------- Display is ON
%a "OFF" ------------------------ Display is OFF
"CNTDWNOFF" ---------- Countdown OFF
"Error code"[CR]
"000_%1"[CR]
"OFF" ------------------------------ Logo function is OFF
%1 "DFLT" ----------------------------- Default Logo is selected
"USER" ---------------------------- User Logo is selected
"Error code"[CR]
"000_%1"[CR]
"ON" ------------------------------ Ceiling is ON
%1
"OFF" ----------------------------- Ceiling is OFF
"Error Code" [CR]
"000_%1"[CR]
"ON" ------------------------------ Rear is ON
%1
"OFF" ----------------------------- Rear is OFF
"Error Code" [CR]
63/72