Status Read Command - Sanyo PDG-DWL100 Owner's Manual

Appendices
Format
The command is sent from PC to the projector with the format below;
■
The tables on pages
56~58 show the typical
Command
command lists for con-
trolling the projector.
Please consult your
local dealer for further
information of other
commands.
During the standby
mode status, the projec-
tor responds to "Power
On" through RS232/
PJLink/Telnet com-
mands.
In Standby mode,
the projector will not
respond [S1] when
sending CR6 command
by RS232/Telnet.
58
English
All manuals and user guides at all-guides.com

Status Read Command

'CR' [Command] 'CR'
Command: one character (refer to the command table below.
The projector decodes the command and returns the 'Character
string' with the format below;
Projector
Function
CR0 Status Read
CR1 Input Mode Read
CR3 Lamp Time Read
CR4 Setting Read
CR6 Temperature Read
CR7 Lamp Mode Read
Projector status
Return
00 Power ON
20 Cooling Down
10 Power Failure
Cooling Down due to Abnormal Temperature
28
in process
Cooling Down in process after Off due to lamp
21
failure
S1 = Temperature at Sensor 1 (˚C)
S1 (ex.) S1 = 12.3˚C
--> The projector displays "12.3