Arrow BY1012-A Owner's Manual & Assembly Instructions page 33

® Parts Needed For ® O RightDoorAssembly(1)
Step 20 Doo Installation &Adjustment
® Left Door AssemNy (1)
SQ33
Horizontal Door Brace
Gable
I From inside the building, put the
bottom of the right door assembly (on
your left when you are inside the
building) behind door jamb into the
front frame track.
DoorTrack
DoorSlide
2 Position the top of the door so that
the holes in the door line up with the
Front Floor
FrameAssembly
holes in the door slides.
:3 Fasten the door to the door slides
using a #10Bxl/2" screw.
NOTE
The four holes in the top of each
door allow you to adjust the
doors. Place the door slide in
the middle 2 holes.
4 Repeat steps 1 through 3 for the
left door.
Adjustment Holes Allow
Doors to Meet Evenly
Along Their Length
oo®O
Adjustment Holes
Right Door
DoorSlide
#10Bxl/2" Screw
J
Left Door
33