Arrow CO1014-C1 Owner's Manual & Assembly Instructions

Arrow CO1014-C1 Owner's Manual & Assembly Instructions

Hide thumbs Also See for CO1014-C1:

Advertisement

Owner's Manual & Assembly Instructions
SO01et
Model No.
715830210
Storage Area: 129 Sq. Ft.
12,0 m
BUILDING DIMENSIONS * Size rounded off to the nearest foot
*Approx.
Size
Size
10' x 14'
121" x 160 1/4"
3,0 m x 4,0 m
307,3 cm x 407,0 cm
CO1014-C1
VS1014-C1
YT1014-C1
Missing Parts, Questions on Assembly?
Call: 1-800-851-1085
Do not return to dealer, they are not
equipped to handle your requests.
852 Cu. Ft.
24,1 m
2
3

Exterior Dimensions

(Roof Edge to Roof Edge)
Width
Depth
123 1/4"
162 3/4"
313,1 cm
413,4 cm
DK1014-B1
VY1014-A1
697.68604-A1
CAUTION: SOME PARTS HAVE SHARP EDGES. CARE
MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES
TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ
SAFETY INFORMATION PROVIDED IN THIS MANUAL
BEFORE BEGINNING CONSTRUCTION. WEAR GLOVES
WHEN HANDLING METAL PARTS.

Interior Dimensions

(Wall to Wall)
Height
Width
87 7/8"
118 1/4"
223,2 cm
300,4 cm
LX1014-C1
WV1014-C1
697.68630-A1
Depth
Height
Width
157 1/2"
86 5/8"
55 1/2"
400,1 cm
220,0 cm
141,0 cm 152,4 cm
Door
Opening
Height
60"

Advertisement

Table of Contents
loading

Summary of Contents for Arrow CO1014-C1

  • Page 1 Owner's Manual & Assembly Instructions SO01et Model No. CO1014-C1 DK1014-B1 LX1014-C1 VS1014-C1 VY1014-A1 WV1014-C1 YT1014-C1 697.68604-A1 697.68630-A1 Missing Parts, Questions on Assembly? Call: 1-800-851-1085 Do not return to dealer, they are not equipped to handle your requests. 715830210 CAUTION: SOME PARTS HAVE SHARP EDGES. CARE MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES Storage Area: 129 Sq.
  • Page 2: Before You Begin

    BEFORE YOU BEGIN..Owner's Manual Before beginning construction, check local building codes regarding footings, location and other requirements. Study and understand this owner's manual. Important information and helpful tips will make your construction easier and more enjoyable. Instructions are supplied in this manual and contain all Assembly Instructions: appropriate information for your building model.
  • Page 3 PLAN AHEAD..Be sure the day you select to install your building is dry and calm. Watch the Weather: Do not attempt to assemble your building on a windy day. Be careful on wet or muddy ground. Whenever possible, two or more people should work together to assemble Teamwork: your building.
  • Page 4: Safety First

    SAFETY FIRST..Safety precautions are important to follow throughout the construction of your building. •Care must be taken when handling various •Practice caution with the tools being used in the pieces of your building since some contain assembly of this building. Be familiar with the sharp edges.
  • Page 5 CARE & MAINTENANCE..A5 Web For long lasting finish, periodically clean and wax the exterior surface. Touch- Finish: up scratches as soon as you notice them on your unit. Immediately clean the area with a wire brush; wash it and apply touch-up paint per manufacturer's recommendation. Keep roof clear of leaves and snow with long handled, soft-bristled broom.
  • Page 6 ACCESSORIES..A6 WEB ROOF STRENGTHENING FLOOR FRAME KITS (heavy snow load) KITS Extra roof beams and gable braces designed for added protection against heavy snow accumulation. Increases the strength of your roof by 50%. ANCHOR KITS MODELS FB47410, FB5465, FB106-A Model No.
  • Page 7 THIS PAGE LEFT BLANK INTENTIONALLY...
  • Page 8 THIS PAGE LEFT BLANK INTENTIONALLY...
  • Page 9 Base The Base For Your Building OPTION 1: ARROW FLOOR FRAME KIT: (Order No. FB1014-A or 68387-A) Arrow has the best base for your building in this simple kit. It keeps stored items above the ground. This kit should be used with one of the following: A.
  • Page 10 Anchoring Anchoring Down The Building It is important that the entire floor frame be anchored after the building is erected. Below are recommended ways of anchoring. Anchoring into Wood/Post: (Model No. AK4 or 60298) Arrow Anchoring Kit: Use 1/4" (6 mm) Wood Screws. There are 1/4" (6 mm) Recommended for use with any suggested base.
  • Page 11 Hardware SO11 Remove from bag of screws and save for the last step 65900A #10Bx1/2" (13 mm) 65923 65004 65103 Black Screw (8) #8-32x3/8" (10 mm) #8Ax5/16" (8 mm) #8-32 Hex Nut (240) (Packed with Screws) Bolt (240) Screw (446) 65109 67468 66646...
  • Page 12: Table Of Contents

    Parts List SO12et Assembly Part Part Quantity Check Key No. Number Description In Carton List 3719 Door Handle Brace 9373 Front Wall Panel 6020 Corner Panel 6108 Large Right Gable 6109 Large Left Gable 6114 Small Right Gable 6115 Small Left Gable 6188 Right Roof Panel 6189...
  • Page 13 Assembly by Key No. SO13et...
  • Page 14: Side Floor Frame

    ● ● ● ● ● 8934 Ramp (1) ● Parts Needed For ● ● ● ● ● ● 9367 Front Floor Frame (2) Step 1 ● ● ● ● ● 8936 Rear Floor Frame (2) Floor Frame Assemblies ● ● ● ● ● 10387 Side Floor Frame (4) SO14hw (13) 9367...
  • Page 15: Side Wall Channel

    ● ● ● ● ● 5986 Rear Wall Angle (2) ● Parts Needed For ● ● ● ● ● ● 10389 Rear Wall Channel (2) Step 2 ● ● ● ● ● 10388 Side Wall Channel (4) Frame Assemblies ● ● ● ● ● 10391 Side Wall Angle (4) SO15hw Rear Wall Channel 10389...
  • Page 16: Roof Beam

    ● Parts Needed For ● ● ● ● ● ● 10386 Roof Beam (8) Step 3 Roof Beam Assemblies SO16hw 10386 (30) 10386 The roof beams join the two gables Roof Beam 159 3/8" 404,8 cm and support the roof panels. The main roof beam is made up of four pieces overlapped back to back at the cen- ter.
  • Page 17: Door Track Splice

    ● Parts Needed For ● ● ● ● ● ● 6403 Door Track Splice (1) Step 4 ● ● ● ● ● 9366 Door Track (2) Door Track Assembly A17hw NOTE: Door Track Splice (painted part) 6403 The door track assembly supports the sliding doors and reinforces the front wall.
  • Page 18 ● ● ● ● ● Front Floor Assembly (1) ● Parts Needed For ● Step 5 ● ● ● ● ● Side Floor Assembly (2) Floor Frame ● ● ● ● ● Rear Floor Assembly (1) SO18hw RIGHT REAR 10387 Assemble the four corners of the floor frame using two screws at each corner as shown.
  • Page 19 ● Parts Needed For ● ● ● ● ● ● 6515 Wall Panel (2) Step 6 ● ● ● ● ● 9373 Front Wall Panel (2) Corners ● ● ● ● ● 6020 Corner Panel (4) SO19hw Narrow Side 6020 (34) Wide Side NOTE...
  • Page 20 ● Parts Needed For ● Step 7 ● ● ● ● ● Rear Wall Channel Assembly (1) ● ● ● ● ● Side Wall Channel Assembly (2) Mid Frames SO20hw (20) The mid frame pieces give rigidity to the side and rear walls. Fasten the rear wall channel across the middle of the rear wall using screws.
  • Page 21 ● ● ● ● ● Door Track Assembly (1) ● Parts Needed For ● Step 8 ● ● ● ● ● Rear Wall Angle Assembly (1) Top Frames ● ● ● ● ● Side Wall Angle Assembly (2) SO21hw (26) The top frame pieces give rigidity to the walls and provide a surface for attaching the gables which support...
  • Page 22: Wall Panel

    ● Parts Needed For ● Step 9 ● ● ● ● ● 6515 Wall Panel (10) Wall Panels SO22hw STEP (144) (15) Crimped Rib STEP Each wall panel has a crimped rib on Underneath one side. The crimped rib should go under the rib of the panel that follows 6515 Detail Showing...
  • Page 23 ● Parts Needed For ● ● ● ● ● ● 9369 Door Jamb (2) Step 10 ● ● ● ● ● 9365 Front Wall Channel (2) Front Channel/Door Jamb SO23hw 9365 (18) STEP The door jambs reinforce the door opening and provide an attractive INSIDE OF trim.
  • Page 24: Roof Panel

    ● ● ● ● ● 6108 Large Right Gable (2) ● Parts Needed For ● ● ● ● ● ● 6109 Large Left Gable (2) Step 11 ● ● ● ● ● 6114 Small Right Gable (2) Gable Assemblies ● ● ● ● ● 6115 Small Left Gable (2) ●...
  • Page 25 ● ● ● ● ● Left Gable Assemblies (2) ● Parts Needed For ● ● ● ● ● ● Right Gable Assemblies (2) Step 12 ● ● ● ● ● Single Roof Beam Assemblies (2) Gables/Roof Beams ● ● ● ● ● 6636 Gable Brace (2) SO25hw (28) (12)
  • Page 26 ● Parts Needed For ● ● ● ● ● ● Main Roof Beam Assembly (1) Step 13 ● ● ● ● ● 6227 Roof Beam Brace (2) Roof Beam/Braces SO26hw STEP Fasten the track supports to the front gable assembly only, as shown. Track Supports 6228 Wrap the weather stripping tape around the two joined edges of the...
  • Page 27 ● Parts Needed For ● Step 14 ● ● ● ● ● 6188 Right Roof Panel (1) Right Roof Panel SO27et Installing the roof panels is best done with a step ladder. Install the first roof panel at the back right corner of the building.
  • Page 28 ● Parts Needed For ● ● ● ● ● ● 6189 Left Roof Panel (1) Step 15 ● ● ● ● ● 6538 Roof Panel (2) Ridge Caps & Panels ● ● ● ● ● 6797 Ridge Cap (3) SO28hw Screws To (21) (22)
  • Page 29 ● Parts Needed For ● ● ● ● ● ● 6538 Roof Panel (4) Step 16 ● ● ● ● ● 6869 Ridge Cap (3) Ridge Caps & Panels SO29hw (16) (32) Install two roof panels 6538 work- ing side to side. Cover the notched NOTE areas of the roof panels with strips of If roof beam holes do not line up...
  • Page 30 ● ● ● ● ● 6538 Roof Panel (2) ● Parts Needed For ● ● ● ● ● ● 6797 Ridge Cap (3) Step 17 ● ● ● ● ● 6188 Right Roof Panel (1) Ridge Caps & Panels ● ● ● ● ● 6189 Left Roof Panel (1) SO30hw (36) (72)
  • Page 31 ● ● ● ● ● 6893 Left Side Roof Trim (2) ● Parts Needed For ● Step 18 ● ● ● ● ● 6892 Right Side Roof Trim (2) Roof Trim ● ● ● ● ● 6015 Side Roof Trim (2) SO31hw (10) Attach the right, left and side roof...
  • Page 32 ● ● ● ● ● 3719 Door Handle Brace (2) ● Parts Needed For ● ● ● ● ● ● 10475 Right and Left Doors (2) Step 19 ● ● ● ● ● 10497 Horizontal Door Brace (4) Door Assembly ●...
  • Page 33 ● Parts Needed For ● ● ● ● ● ● Right Door Assembly (1) Step 20 ● ● ● ● ● Left Door Assembly (1) Door Installation & Adjustment SQ33hw Horizontal Door Brace Gable Door Track Door Slide From inside the building, put the bottom of the right door assembly (on your left when you are inside the building) behind door jamb into the...
  • Page 34 Anchoring and Floor Frame XA34hw Anchoring Anchor your building at this time. Floor Frame If you have purchased a Floor Frame Kit you need to install it at this time.
  • Page 38 Sheet #2 48“ x 76 1/2” Platte 2 * Hoja núm. 2 Sheet #1 * Panneau n 48“ x 78 3/4” 121.9 cm x 194.3 cm ES1014 & 697.68740 Platte 1 * Hoja núm. 1 48” x 75 9/16” * Panneau n 121.9 cm x 200 cm 121.9 cm x 191.9 cm Sheet #5...
  • Page 39 SOME FACTS ABOUT RUST XA35hw SOME FACTS ABOUT RUST 1. Avoid nicking or scraping the coating surface, Rusting is a natural oxidizing process that occurs inside and out. when bare metal is exposed to moisture. Problem areas include screw holes, unfinished edges, or 2.

Table of Contents