Arrow BY1012-A Owner's Manual & Assembly Instructions page 15

•
5986 Rear Wall Angle (2)
k+_Lp_++e ++'++_+'_ Q Parts Needed For • , ,0389 RearWall Channel (2)
Frame Assemblies
® 10390 Side Wall Channel (4)
• 10393 Side Wall Angle (4)
SVI5
The main frame pieces reinforce the
walls. These pieces will later be in-
stalled in the center and at the top
edge of the side walls and the rear
wall. Proceed as follows:
10389
FIll RearWall Channel
118 1/8" 3,0m
10389
I Overlap the rear wall channel
pieces as shown in the figure and
fasten the two pieces together with
eight bolts as shown.
10390
Side Wall Channels
140 3/8" 3,6m
2 Make two side wall channels by
overlapping the side wall channel
pieces as shown. Fasten each set
together with eight bolts as shown.
3 Overlap the rear wall angle
pieces as shown in the figure and
fasten them together with one bolt in
the center hole.
10390
Rear Wall Angle
4 Make two side wall angles by
overlapping the side wall angle
pieces as shown. Fasten each set
together with one bolt thru the large
hole at the end of each part.
5 Set the assemblies aside. You will
use them later.
Side Wall Angles
STEP STEP
3 4
RearWall Channel 118 118" 3,0m
els 140 3/8' 3,6m(2 Assemblies)
Rear Wall Angle 118 1/8" 3,0m
_Angl!_es 1403/8" 3,6m(2Assemblies)
15