Arrow BY1012-A Owner's Manual & Assembly Instructions page 21

Q Parts Needed For • ODoorTrackAssembly(1)
St 8 @ Rear Wall Angle Assembly (1)
ep
Top Frames ®s_ae w., a.g_ea.._mb_y (a}
SQ21
The top frame pieces give rigidity to
the walls and provide a surface for
attaching the gables which support
the roof.
1 Fasten the rearwall angle across
the inside top of the rear wall using
screws.
2 Fasten the sidewall angles across
the inside top of the side panels us-
ing screws. Side wall angles must
overlap rear wall angle in corners.
:3 Fasten the door track assembly
(holes on top) across the top of the
front wall panels using screws. See
the figure.
10393
Wall Angles
Must Face
Inside
Building
5986
LongLeg
on Top
Opening
facingin
Sho_Leg
on Bottom
9366
FRON.
21