Parts Needed For ® Assembly; Doortrack Splice - Arrow BY1012-A Owner's Manual & Assembly Instructions

• Parts Needed For ® • 6403 DoorTrackSplice(1)
Step 4
Doo
Track Assembly
®9366DoorTrack(21
gO17
NOTE:
Door Track Splice (painted part)
The door track assembly supports
the sliding doors and reinforces the
frontwall. It is made up of three pieces.
1 Using the door track splice,
(painted), join the door track
(galvanized) pieces end-to-end as
shown.
2 Insert four screws from the under-
side only.
Hint: The holes in the top side of the
door track assembly are for fastening
the gable to the top of the front wall in
a later step.
6403 ._
©
Long Leg
_ ,11 on Top
I Z I _ShortLeg
' ' J_ 9366on Bottom
._J_ 9366
118 118" 3m
:3 Position door slides onto the legs,
from the end of door track
assembly, as shown in the end view.
NOTE: Flat side on top, pins and
holes must be oriented as shown.
4 Set this piece aside for later use.
END VIEW
118 1/8" 3m
17