Arrow BY1012-A Owner's Manual & Assembly Instructions page 18

Step 5
SWig
O Parts Needed For •
Floor Frame
• Front Floor Assembly (1)
O Side Floor Assembly (2)
• Rear Floor Assembly (1)
dation. Assemble the four corners of
the floor frame using two screws at
each corner as shown. At the front
corners fasten bolts through from
the bottom with nuts on top.
FRONT '
2 Measure the floor frame diago-
nally. When the diagonal measure-
ments are equal, the floor frame is
square.
9367
i
When Diagonal Measurements
are Equal the Floor Frame
is Square.
NOTE
If using a wood platform or
concrete slab do not fasten the
J
floor frames to your base at this
time. You will anchor the
building after it is erected.
NOTE
18