Setting On Menu; Inputting Image To Sub From Main - Computer Signal; Inputting Image Of Sub And Main Individually - Hitachi CP-X4021N User Manual

5.4 Setting on menu

If you use Intellectual Stack
as below. In the case of inputting image from
is different if you use computer signal, or video signal such as
VIDEO.

Inputting image to Sub from Main - Computer signal

1.
If STACK menu is already on screen, proceed to 3 below. Otherwise press
MENU
button on the remote control.
If MENU dialog is displayed, use the ▲/▼ buttons to
point at MAIN, and press the ► button. Then, a menu
appears on screen.
If not, a menu directly appears on screen.
2.
Using the ▲/▼/◄/► buttons, go down the menu tree as below.
ADVANCED MENU
> SERVICE >
STACK menu will appear on screen.
(Operating Guide
3.
Use the ▲/▼ buttons to point at
SOURCE, and press the ► button to display
INPUT SOURCE
4.
Use the ▲/▼ buttons to point at
button to complete the setting. ( 23 )
5.
Press COMPUTER
remote control or
panel on Main
dialog is displayed on screen. Use the ▲/▼
buttons to point at the source you connected a
cable to, and press the ► button to complete the
setting.
• When
NOTE
setting is invalid.
• When FIXED (COMPUTER IN 1)
COMPUTER IN2
• When FIXED (COMPUTER IN 1)
port setting, such as COMPUTER, VIDEO,
MY BUTTON (if any function related to input source is assigned) buttons on
the remote control, and
select input source is displayed.
with RS-232C cable connection, follow the instruction
> OPTION
COMMUNICATION
→ OPTION
dialog.
or VIDEO
INPUT button on the control
projector, MAIN INPUT SOURCE
FIXED (COMPUTER IN 1)
(Operating Guide
can be selected, and other input cannot.
INPUT button on the projector is pressed, the dialog to
Setting for input port on menu
Main
> STACK
menu)
SUB INPUT
SUB
FIXED (COMPUTER IN 1)
button on the
is selected, the
→ SETUP menu)
is selected, only
is selected, if any buttons related to input
MY SOURCE/DOC.CAMERA
31
to Sub, note that the operation
COMPONENT
, and press the ►
MONITOR OUT
COMPUTER IN1
and
and
and