Important Information For Intellectual Stack - Hitachi CP-X4021N User Manual

3.7 Important information for Intellectual Stack

This section does not explain the menu operation, but gives you some important
information for setting
● If you use Intellectual
Sub.
● If you pile up two projectors, the control panel of the projector laid underneath
cannot be operated, so that it is strongly recommended to set the projector laid
underneath to
● Any keys except
disabled. Operate the projectors with the control panel of
remote control.
● Even if pressing
off Sub projector only. If you press the button for more than 3 seconds,
and Sub projectors are turned off. Even if you press the button, you can turn on
neither Main nor
● Main projector can receive the signal from the remote control but
cannot, so the remote control should be pointed at
● If you use a wired remote control, connect the plug to
● If you use a simple PC mouse function, connect both of
to your computer with USB cables.
● AUTO SEARCH
stack.
● Sub projector cannot be turned on through network communication to
and by Web control on Sub.
projector.
● Remote Control
( Network Guide
● If the projectors are tried to turn on with using
Messenger function, the projectors will exit from
the message accordingly. If you wish to start
MAIN/SUB again on both projectors in
again for both projectors.
● Main and Sub
- Muting feature
- Magnifying feature
- ASPECT and
- COMPUTER IN
- MESSEAGE
- MY BUTTON
- TEMPLATE (Operating Guide
(continued on next page)
Main/Sub projectors. Read all carefully.
Stack, one projector must be set to
Sub and the other to Main.
STANDBY/ON
STANDBY/ON
Sub projector.
function is disabled while the projector is used in
Sub
function on Web Control of
→ 3.11 Remote
projectors have common setting for the following.
(Operating Guide
(Operating Guide
OVER SCAN (Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
button on the control panel of
button of Sub projector, it is not possible to turn
projector should be controlled though
Sub projector is disabled.
Control)
Power on & Display on
Intellectual stack
Intellectual stack
STACK MODE
→ Temporarily muting the
→ Using the magnify
→ INPUT
→ SCREEN menu)
→
OPTION menu)
→ SCREEN menu)
24
Setting on Stack menu
Main and the other to
Sub
Main projector or the
Sub
Main projector.
Main projector, not to Sub.
Main and
again, select
dialog, or turn off and on
sound)
feature)
→ IMAGE menu)
menu)
projector are
Main
projector
Sub projectors
Intellectual
Sub
Main
feature on
and display