Table Of Contents - Hitachi CP-X4021N User Manual

Contents
1. Introduction ........................3
1.1 Entries and graphical
symbols explanation ........................ 3
1.2 Important safety instruction .......... 3
For Instant Stack feature ..................... 3
For general installation ........................ 5
1.3 Basic information
and preparation ............................... 6
Instant Stack ........................................ 6
Intellectual Stack and Simple Stack ..... 6
Remote control for Intellectual Stack
and Simple Stack ............................ 6
Installation styles ................................. 6
Tentative naming of two projectors ...... 6
2. Installation ..........................7
2.1 Preparation with powered up ........ 7
2.2 Installation of
the first projector (Set A) ................ 8
Removing pocket caps ........................ 8
Preparing of elevator feet .................... 8
Deciding installation position ............... 8
Setting up Set A ................................... 9
2.3 Installation of
the second projector (Set B) ........ 11
Piling up projectors ............................ 11
Connecting projectors ........................ 11
Setting up Set B ................................. 12
2.4 Confirmation of Main
& Sub setting ................................. 14
2.5 Fine adjustment
of image position ........................... 15
For Intellectual Stack users ............... 15
For Simple Stack users ...................... 16

3. Setting on STACK menu ..17
3.1 Displaying STACK menu ............ 17
3.2 Selecting Main, Sub or off .......... 18
3.3 Selecting lamp working mode..... 19
3.4 Selecting lamp switching mode .. 21
3.5 Selecting input source to Sub ..... 22
3.6 Exiting STACK menu .................. 23
In STACK menu ................................. 23
In a dialog from STACK menu ........... 23
3.7 Important information
for Intellectual Stack ...................... 24
4. Connecting cables ...........27
4.1 Connecting RS-232C cable ........ 27
4.2 Connecting signal cables............ 28
Inputting image to Sub from Main ...... 28
Inputting image
to Sub and Main individually ........... 28
5. Setting for input port
on menu ..............................29
5.1 Preparing menu operation .......... 29
5.2 Checking Main projector's
operating status ............................. 29
5.3 Starting Main projector ............... 30
5.4 Setting on menu ......................... 31
Inputting image to Sub from Main
- Computer signal ........................... 31
Inputting image to Sub from Main
- Video signal
(either COMPONENT or VIDEO) ... 32
Inputting image of
Sub and Main individually ............... 31
6. Restriction
on Schedule function ........34
7. Troubleshooting ...............36
2
