Hitachi CP-X4021N User Manual page 20

Selecting lamp working mode
NOTE • When
are recommended because
images on screen.
- Set the same image on
Sub projectors.
- Capture the same image on
- Save the same image on
- Set the same content of message for
→ Messenger
• When DUAL is selected for
of image quality on screen. Set
adjustment. When
changed, the image position is shifted.
• When ALTERNATE
off on a working projector, the other automatically starts to work. In a case an
RS-232C cable is disconnected or AC power is not supplied, the other will not
work.
• Even when ALTERNATE
TRANSITION DETECTOR
menu), the both projectors will turn on. Then, after inputting security code for
each one, one of projector will turn off.
• In the Intellectual Stack
projector operates in different way from normal use.
Troubleshooting) When
STANDBY/ON
is pressed, Main
STACK MODE
- While Main projector is selecting projectors to turn on,
Main projector is blinking in green.
- If Main projector is required to turn on,
turns to steady green after the lamp is on, as same as usual.
- If only Sub projector is required to turn on,
projector turns to steady orange after
- If an error is occurred on
indicator on Main
(continued)
DUAL is selected for
Main
TEMPLATE
MyScreen
MY IMAGE
Function) on Main
LAMP
MIRROR
MIRROR setting
is selected, if an error is occurred and the lamp is turned
is selected, if one or both of
are set to
POWER
use,
Main and
button on the remote control or control panel of
projector will decide projectors to turn on in accordance with
setting.
Main
projector is lighting or blinking in red.
LAMP MODE, the following settings
and Sub projectors may display different
and START UP
on Main
on Main and
Messenger
and Sub projectors.
MODE, the image shift causes degradation
setting in advance of image position
(Operating Guide
ON (Operating Guide
indicator on the control panel of
Sub projectors are in standby mode, if
POWER
POWER
Sub projector turns on.
projector, Sub projector turns on and
20
Setting on Stack menu
functions on
and Sub projectors.
Sub projectors.
function (Network Guide
→ SETUP
PIN LOCK and
→ SECURITY
(Operating Guide
Main
POWER indicator on
indicator on Main
indicator on Main
Main and
menu) is
→
projector
projector
POWER