Selecting Lamp Switching Mode - Hitachi CP-X4021N User Manual

3.4 Selecting lamp switching mode

The setting is required only when
( 19 ) Select one of lamp switching mode,
NATE use.
1.
Point at ALTERNATE MODE
tons in STACK
display ALTERNATE MODE
2.
Use the ▲/▼ buttons in the dialog to point at
AUTO : for turning on one projector that has the lamp which usage time is
shorter than the other's one.
NORMAL : for turning on one projector that was not used last time.
3.
Press the ◄ button to turn back to previous menu, or the ► button to com-
plete the setting. ( 23 )
• ALTERNATE MODE
NOTE
ALTERNATE is selected on
• To maintain quality and reliability of two projectors, it sometimes happens to
turn on a projector that has a lamp being used longer time than the one of the
other projector even if
ALTERNATE
with the ▲/▼ but-
menu, then press the ► button to
dialog.
dialog can be operated on
LAMP MODE
AUTO is selected.
is selected at
AUTO or NORMAL, in the
AUTO or NORMAL.
dialog.
21
Setting on Stack menu
LAMP MODE
ALTER-
Main projector, when
dialog.