Table of Contents
Advertisement
3.4 Selecting the light source switching mode
The following setting is necessary only when ALTERNATE is selected in the
LIGHT MODE dialog. ( 15 ) Select the AUTO or NORMAL light source switching
mode when using ALTERNATE.
1.
Highlight ALTERNATE MODE in the STACK
menu with the ▲/▼ buttons, then press the ►
button to display the ALTERNATE MODE dialog.
2.
Use the ▲/▼ buttons in the dialog to highlight AUTO or NORMAL.
AUTO: Turns on the projector with the least light source usage.
NORMAL: Turns on the projector that was not used the previous time.
3.
Press the ◄ button to return to the previous menu, or press the ► button to
complete the setting. ( 20 )
• The ALTERNATE MODE dialog can be operated on the Main projector
NOTE
when ALTERNATE is selected in the LIGHT MODE dialog.
• To maintain the quality and reliability of the two projectors, the projector with
the most light source usage may be turned on even if AUTO is selected.
17
STACK menu settings
QM00974-1
Advertisement
Table of Contents
