Selecting Lamp Switching Mode - Hitachi CP-X8150 User Manual

3.4 Selecting lamp switching mode

The following setting is necessary only when ALTERNATE is selected in the
LAMP MODE dialog. ( 15 ) Select the AUTO or NORMAL lamp switching mode
when using ALTERNATE.
1.
Highlight ALTERNATE MODE in the STACK
menu with the ▲/▼ buttons, then press the ►
button to display the ALTERNATE MODE dialog.
2.
Use the ▲/▼ buttons in the dialog to highlight AUTO or NORMAL.
AUTO: Turns on the projector with the least lamp usage.
NORMAL: Turns on the projector that was not used the previous time.
3.
Press the ◄ button to return to the previous menu, or press the ► button to
complete the setting. ( 19 )
• The ALTERNATE MODE dialog can be operated on the Main
NOTE
projector when ALTERNATE is selected in the LAMP MODE dialog.
• To maintain the quality and reliability of the two projectors, the projector with
the most lamp usage may be turned on even if AUTO is selected.
17
STACK menu settings