Printer Receives A Blank Fax; Received Fax Has Poor Print Quality - Lexmark X7550 User Manual

4
Press or repeatedly until the Fax Setup submenu is highlighted.
5
Press .
6
Press or repeatedly until the Dialing and Sending submenu is highlighted.
7
Press .
8
Press or repeatedly until you reach Dial Method.
9
Press or repeatedly until Behind PBX (Dial Tone Detect Off) appears.
10
Press to save.

Printer receives a blank fax

These are possible causes and solutions. Try one or more of the following:
Check original document
Ask the sender to verify the original document was loaded correctly.
Check ink
Check the ink levels, and install a new print cartridge if necessary.
Check cartridges
1
Remove the print cartridges.
2
Make sure the sticker and tape have been removed.
3
Reinsert the print cartridges.

Received fax has poor print quality

These are possible solutions. Try one or more of the following:
Review checklist for sender
•
Check that the quality of the original document is satisfactory.
•
Resend the fax. There may have been a problem with the quality of the telephone line connection.
•
Increase the fax scan resolution.
Check ink
Check the ink levels and install a new print cartridge if necessary.
Decrease the transmission speed
1
From the control panel, press
2
Press .
3
Press or repeatedly until the Fax Setup submenu is highlighted.
or repeatedly until Fax is highlighted.
Troubleshooting
190