Working With Photos Using The Computer - Lexmark X7550 User Manual

5
Press or to select Computer.
6
Press .
If the computer is connected directly to the printer through a USB cable:
a
Press to begin saving photos to your computer.
b
Follow the instructions on the computer screen.
If the printer is connected to a wireless network, you will be asked to select the computer that you want to use.
a
Press or to select a computer.
b
Press .
If you set a PIN during network setup and are being asked for it:
1
Enter the PIN using the
digit.
2
Press .
c
Press to begin saving photos to the computer.
d
Follow the instructions on the computer screen.
Related topics:
•
"Connecting photo storage devices" on page 90
•
"Transferring photos from a memory device to the computer over a wireless network" on page 106
Viewing a slideshow of photos on the control panel display
1
Insert a memory card or flash drive.
2
From the control panel, press
3
Press repeatedly until View Slideshow is highlighted.
4
Press .
5
Press or to select a speed for the slideshow.
6
Press .
Note: Pressing while viewing a photo selects that photo for printing.
Related topics:
•
"Inserting a memory card" on page 90
•
"Inserting a flash drive" on page 91

Working with photos using the computer

Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For
best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24
hours before stacking, displaying, or storing.
Printing cards
1
Load greeting cards, index cards, or postcards.
and to select a digit location and the
.
Working with photos
99
and to select a value for that