Lexmark X7550 User Manual page 123

Use this
Fax Setup
Understanding Scan and the Scan Mode menu
To access and navigate:
1
From the control panel, press
2
If the printer is connected to your computer through a USB cable, press
to make any changes for this scan job.
or
If you want to make changes, press
The Downloading scan applications list from your computer. Please wait. message
appears for a few seconds.
The Scan Mode menu appears.
Note: If your printer is connected on a network, see "Scanning to a computer over a network using the control
panel" on page 59.
3
From the Scan Mode menu, you can:
•
Press to preview the job.
•
Press to return to the Scan Mode menu from the preview if you need to change a value.
•
Press or repeatedly to scroll through the menu items or submenu until you reach the one you want
to change.
•
Press or repeatedly to reach the value you want.
4
To go into other menu items and values to make additional changes, continue to use the navigation buttons
( , , , and ).
5
If needed, press
6
Press to start the scan job.
or repeatedly until Scan is highlighted.
.
repeatedly to return to the previous menu.
Understanding the printer
To
Access the Fax Setup menu and menu items. You can
change the values and save them as user default
settings.
•
Add and edit entries in the Speed Dial Phone Book.
•
Print fax history or transmission status reports.
•
Customize settings in Ringing and Answering
for receiving a fax.
•
Select fax printing options.
•
Customize settings in Dialing and Sending for
sending a fax.
•
Block faxes from the numbers you specify.
Once each value is chosen, press
as user default settings and exit.
Note: The user default setting remains in effect until you
access the menu again, choose another value, and save
it. An asterisk (*) appears next to the user default setting.
for a Quick Scan if you do not want
123
to save the values