Cannot Print From Digital Camera Using Pictbridge - Lexmark X7550 User Manual

Make sure the cartridges are properly installed
With the front of the printer facing you, check for proper print cartridge installation. If you are using a color cartridge,
make sure it is properly installed in the right carrier. If you are using a black cartridge or photo cartridge, make sure
it is properly installed in the left carrier.
For more information, see the related topic below.
Make sure the Lexmark printer driver is set as the default printer and is not on hold or
paused
To set the printer as default
1
From the Finder desktop, choose Applications
2
From the printer list dialog, select your printer.
3
Click the Make Default icon.
To resume print jobs
1
From the Finder desktop, choose Applications
2
From the list of printers, double-click your printer.
3
From the Printer pop-up menu, click Start Jobs if you want to resume all print jobs in the queue; if you want to
resume a particular print job, select the document name, and then click Resume.
Check your USB connection
1
Check the USB cable for any obvious damage.
2
Firmly plug the square end of the USB cable into the back of the printer.
3
Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the

Cannot print from digital camera using PictBridge

These are possible solutions. Try one or more of the following:
Enable PictBridge printing from camera
Enable PictBridge printing on the camera by selecting the correct USB mode. If the camera USB selection is incorrect,
the camera will be detected as a USB storage device, or an error message will be displayed on the control panel of
the printer. For more information, see the digital camera documentation.
Make sure the camera is a PictBridge-enabled digital camera
1
Disconnect the camera.
2
Connect a PictBridge-enabled digital camera to the PictBridge port. See the digital camera documentation to
determine whether it is PictBridge-enabled.
Check USB cable
Use only the USB cable that came with the camera.
Remove memory cards
Remove any memory cards from the printer.
Utilities Print Center or Printer Setup Utility.
Utilities Print Center or Printer Setup Utility.
USB symbol.
Troubleshooting
160