Cannot Print From Digital Camera Using Pictbridge; Print Troubleshooting; Improving Print Quality - Lexmark X2470 User Manual

e
Select your operating system.
f
Select the file you want to download, and then follow the directions on the computer screen.

Cannot print from digital camera using PictBridge

Enable PictBridge printing on the camera by selecting the correct USB mode. For more information, see the digital
camera documentation.
1
Disconnect the camera.
2
Connect a PictBridge-enabled digital camera to the PictBridge port. See the digital camera documentation to
determine whether it is PictBridge-enabled.
Use only the USB cable that came with the camera.

Print troubleshooting

•
"Improving print quality" on page 44
•
"Poor text and graphic quality" on page 52
•
"Poor quality at the edges of the page" on page 53
•
"Partial document or photo prints" on page 54
•
"Printer does not print or respond" on page 53
•
"Print speed is slow" on page 53

Improving print quality

If you are not satisfied with the print quality of a document, make sure you:
•
Use the appropriate paper for the document. Use Lexmark Premium Photo Paper if you are printing photos or
other high-quality images.
•
Make sure the glossy or printable side faces you. (If you are not sure which side is the printable side, see the
instructions that came with the paper.)
•
Use a paper that is a heavier weight or bright white.
•
Select a higher print quality.
If the document still does not have the print quality you want, follow these steps:
1
Align the print cartridge. For more information, see "Aligning the print cartridge using the computer" on
page 44.
If print quality has not improved, continue to step 2.
2
Clean the print cartridge nozzles. For more information, see "Cleaning the print cartridge nozzles" on page 44.
If print quality has not improved, continue to step 3.
3
Remove and reinsert the print cartridge. For more information, see "Removing a used print cartridge" on
page 42 and "Installing a print cartridge" on page 42.
If print quality has not improved, continue to step 4.
4
Wipe the print cartridge nozzles and contacts. For more information, see "Wiping the print cartridge nozzles and
contacts" on page 45.
If print quality is still not satisfactory, replace the print cartridge. For more information, see "Ordering supplies"
on page 46.
51