Table of Contents
Advertisement
OPERATION
]
Memorizing
the
Channels
Your TV can memorize
and store all of the available channels
for both "off' air" (antenna)
and
cable chanrle[s.
After the available channels
are memorized,
use the CH A
and CH V
but
tons to scan through
the channels.
This eliminates
the need to change channels
by entming
the channel
digits. There are three steps for memorizing
channels:
selecting
a broadcast
source, memorizing
the channels
(automatic)
and adding
and deleting
channels
(manual).
Selecting
the
Video
Signal-source
Before your television
can begin memorizinf_
tile available channels,
you must specify tile type
of' signal source that is connected
to the TV (i.e., an antenna
or a cable system).
1
Press t he Menuoutran
Press the CH v
button to
select"
ChanneI".
then
press the VOL + button
Pressthe CHv buttonto
select"ANT/CATV", then
PresstheVOL+or VOI.
buttonto cyclethrough
thesechoices:
ANT
or IRC (all cableIV).
Note: STD, HRC and IRC identify various
types of' cable TV systems.
Contact your local
cable company
to identify the type of' cable system that exists in your particular
area.
At this point the signal source has been selected. Proceed to "Storing Channels in Memory"
(next page).
38
C}l,x],]{iI]]R}{]:rv ()},}{},,.,i,,N
Advertisement
Table of Contents
