Control Panel Layout - Konica Minolta bizhub PRESS 1052 User Manual

2.1 What is the image controller?
2.1.3

Control Panel Layout

No. Name
1 Keypad
2 Reset
3
Power LED
4 Data LED
5 Interrupt
6 Stop
7 Proof Copy
8
Start
9 Start LED
10
C (Clear)
11
Access
12 Mode Check
bizhub PRESS 1250/1250P/1052
Description
Enters numeric values.
Restores the machine to the initial settings.
Lights up in red when the main power switch is
turned on, then turns green when the sub power
switch is turned on.
Flashes while the machine is receiving print data.
Stops copying/printing/scanning in progress to allow
another copying job of settings newly specified.
Suspends the current output job or stops the machine
operation.
Used to print a single set or the first page to verify the
copy settings.
Activates various machine operations.
Lights up in blue when the machine is ready to oper-
ate.
It turns orange when any operation cannot be started.
Allows change in entered numeric value.
Sets the machine to allow the operation only when the
next user is authenticated, if user authentication or
account track function is activated and an authenti-
cated user has used the machine.
Used to the Mode Check Screen to check the current
copy settings.
2
2-4