Konica Minolta bizhub PRESS 1052 User Manual page 115

10.3 Parameter details
Image Shift Settings
Function Name
Switch Setting
Unit
Front Side/Back
Side
Left/Right
Top/Bottom
Page Interval
Outside Offset
bizhub PRESS 1250/1250P/1052
Option
[Use Driver Settings]
[Use Printer Settings]
[mm], [inch]
-
0 - 250 mm
0 - 250 mm
-250 mm to 250 mm
0 to 50 mm
Description
[Use Driver Settings] :
Set this to use the shift width set by this printer driver.
[Use Printer Settings] :
Uses the values specified on the control panel on this
machine.
Select the measurement units for the size settings.
Specify the shift direction and the shift width. When you
remove the check from the [Same value for front and
back ] on 2-Sided printing, you can specify the width to
the front and the back respectively.
Shifts the position of the printing image with the speci-
fied amount to the left/right.
Shifts the position of the printing image with the speci-
fied amount to the top/bottom.
You can specify the spacing to use between pages
when the Booklet or Imposition (other than 2 in 1) is
specified. When you specify the negative value (-), pag-
es will be overlapped with the specified width.
When the [Booklet] is specified, you can adjust the
page interval so that the narrower margin is created for
the more outer page, considering the thickness on fold-
ing paper.
10
10-19