Cannot Configure The Settings/Cannot Print According To The Settings; The Printer Driver Settings Have No Effect - Konica Minolta bizhub PRESS 1052 User Manual

18.2

Cannot configure the settings/Cannot print according to the settings

18.2 Cannot configure the settings/Cannot print according to the set-
tings
Check the following items when you cannot configure settings of the printer driver or cannot print according
to the settings you have configured.
Reference
- Some items for the printer driver may not be configured simultaneously.
18.2.1

The printer driver settings have no effect

Problem
Cannot select items in the print-
er driver.
A "conflict" message saying
"unable to configure" or "func-
tion will be canceled" appears.
Cannot print according to the
settings you have configured.
The staple function cannot be
specified.
Cannot staple.
The stapling position is not as
expected.
Cannot specify the punch func-
tion.
Cannot punch.
The punch position is not as ex-
pected.
Combination fails; pages are not
combined, but are printed sepa-
rately.
The overlay is not printed prop-
erly.
Images are not printed properly.
bizhub PRESS 1250/1250P/1052
Possible Cause
Some functions cannot be com-
bined.
You are trying to configure the
functions that cannot be com-
bined.
The settings may not be config-
ured correctly.
The selected functions can be
combined in the printer driver,
but may not be combined in this
machine.
The paper size or paper orienta-
tion specified in the application
may take precedence over the
settings in the printer driver
when printing.
To use the Staple function, an
optional stapler is necessary to
be installed.
When printing a large number of
pages, stapling cannot be per-
formed.
If the document contains pages
of different sizes, stapling can-
not be performed.
The orientation setting is not
correct.
It requires a punch kit, or multi
hole punch.
The hole punching cannot be
specified when Booklet is se-
lected as the paper type.
Printed pages may be fed out
without being punched if the pa-
per is loaded into the paper
source with an incorrect orienta-
tion.
The orientation setting is not
correct.
Originals having different orien-
tations are combined.
Memory of the computer may
be insufficient.
Memory of the computer may
be insufficient.
Remedy
Grayed out items cannot be con-
figured.
Check carefully the functions you
have specified, and then specify
the functions that can be com-
bined.
Check the setting of each item of
the printer driver.
Configure settings in the applica-
tion correctly.
Install the required options and
enable them on the printer driver.
Change the number of pages to
be printed.
Check the document.
Check the stapling position in the
printer driver settings.
Install the required options and
enable them on the printer driver.
Check the setting of each item of
the printer driver.
Check the orientation setting.
Check the punching position in
the printer driver settings.
Align the orientations of the origi-
nal.
Simplify the overlay to reduce the
data size.
Simplify the images to reduce the
data size.
18
18-4