Playing Sound From The Video Equipment - Epson EMP-52 User Manual

Connecting to a Video Source

Playing Sound from the Video Equipment

The projector has a single built-in speaker with a maximum output of 1 W. You
can output sound from the video equipment through the projector's built-in
speaker by connecting the video equipment's audio output port and the Audio
port (RCA monaural jack) on the left side of the projector using an RCA audio
cable (commercially-available).
To audio output port
Use the following procedure to adjust the volume of the sound output.
Procedure
1
Press the [Menu] button on the
remote control, and then select
"Volume" from the "Audio"
menu.
For details on this operation, refer to
"Using the Configuration Menus".
(p.56)
RCA audio cable
(commercially-available)
24
To Audio port
Video Volume : 10 -
-
Audio Tone :
0
Setting Audio Input :
Computer
Reset
Advanced Execute
About
Reset All
: Return : Select : Adjust
+
+
Video