Turning On The Power And Projecting Images - Epson EMP-52 User Manual

Turning On the Projector

Turning On the Power and Projecting Images

Procedure
1
Check that the Power indicator has
stopped flashing and is lit orange.
2 Turn on the power for all equipment connected to the projector.
For a video source, press the [Play] button at the video source to start
playback if necessary.
3
Press the [Power] button on either
the projector's control panel or the
remote control to turn on the power
for the projector.
The Power indicator flashes green, and
after a short period it stops flashing and
projection starts.
Wait until the Power indicator lights green
(it normally takes about 40 seconds to
change).
Tip :
The projector's control panel and remote control buttons cannot be operated while the
Power indicator is flashing green.
Depending on the settings, the message "No-Signal." may appear. See "Setting" - "No-
Signal Msg." (p.51)
Changes from flashing to lit green
29
Lit orange
Power
Computer S-Video/Video Color Mode
Menu A/V Mute Freeze
E-Zoom
Enter
Auto ESC
Remote control