Replacing The Air Filter - Epson EMP-52 User Manual

Maintenance

Replacing the Air Filter

Procedure
1
Turn off the projector power, wait
for the cool-down
and then disconnect the power
cable.
The cool-down period lasts for about 20
seconds. The actual time will vary
depending on the external air
temperature.
2
Put your finger into the recess, and
pull straight out to remove the air
filter.
3 Install the new air filter.
Slide the cover in from the outside, and
then push it in until it clicks into place.
Tip :
Dispose of used air filters properly in accordance
with your local regulations.
period to end,
79