Wide-Screen Projection Of Component Video And Video Images (Changing The Aspect Ratio) - Epson EMP-52 User Manual

Functions for Enhancing Projection
Wide-screen Projection of Component Video and Video
Images (Changing the Aspect Ratio)
This function changes the aspect ratio
component video images (YCbCr and YPbPr) or video images (S-Video or
composite video) are being projected. Images which have been recorded in
digital video or onto DVDs can be viewed in 16:9 wide-screen format.
When images in squeeze
mode are projected at 4:3
Procedure
1 Press the [Menu] button on the
remote control, and then select
"Aspect Ratio" from the
"Video" menu.
For details on this operation, refer to
"Using the Configuration Menus".
(p.56)
2 Press the [ ] and [ ] buttons
to set the aspect ratio to either
"4:3" or "16:9", and then press
the [Enter] button.
3 After making the adjustment, press the [Menu] button to exit
the configuration menu.
of images from 4:3 to 16:9 when
When images in squeeze
mode are projected at 16:9
Video Position
Audio
Brightness
Setting
Contrast
Advanced Color
Tint
About
Reset All Sharpness
Color Mode
Video Signal
Aspect Ratio
Reset
: Return : Select
/
Video Position
Audio
Brightness
Setting
Contrast
Advanced Color
About Tint
Reset All Sharpness
Color Mode
Video Signal
Aspect Ratio
Reset
: Return : Select
/
44
Adjust
: -
0 +
:
0 -
+
: 0 -
+
:
0 -
+
: 0 -
+
Select [Theatre ]
Select [Auto ]
: 4 : 3 16 : 9
Execute
: Set
Adjust
: -
0 +
:
0 -
+
: 0 -
+
:
0 -
+
: 0 -
+
Select [Theatre ]
Select [Auto ]
: 4 : 3 16 : 9
Execute
: Set