Playing Sound From Video Equipment; Connecting A Microphone - Epson PowerLite 826W+ User Manual

note
If you are using the
component-to-VGA video
cable, you will need to
connect an audio adapter to
use the Audio1 or Audio2
jack.
note
If you are using a condenser
microphone, make sure the
Plug-in Power setting in the
Extended menu is set to On.
See page 116 for more
information.
Connecting to Computers, USB Devices, and Other Equipment
60

Playing Sound from Video Equipment

For video equipment, use an RCA-style audio cable, which you can
purchase from an electronics store.
1. Connect the red and white plugs on one end of the cable to the
and jacks on the projector.
R Audio
2. Connect the red and white plugs on the other end to the
corresponding color-coded audio output jacks on your video
source.

Connecting a Microphone

You can connect a dynamic or condenser microphone to the
projector's port, using a 3.5 mm mini-jack cable as shown below.
Mic
Use the
Mic Input Level
volume. See page 109 for more information.
option on the Settings menu to adjust the
L
Connect to
audio-out
ports for
video
equipment