Connecting to Video Equipment
For Component Video (DVD, Video games)
Component video
cable (optional)
To component
video out port
After projection starts, change the "Input Signal" setting in the "Image"
p
menu to either "Component Video (YCbCrg)" or "Component Video
(YPbPrg)" to match the signals from the video equipment.
For RGB Video
Computer cable
(accessory)
To RGB out port
• After projection starts, change the "Input Signal" setting in the
p
"Image" menu to "Computer."
• For an RGB connection, a commercially available adapter or converter
cable may be required.
To Computer/
Component Video port
P.36
s
To Computer/
Component Video port
P.36
s
Playing sound from video equipment
AV cable (red/white)
(commercially available)
To audio out port
p
When using computer and video equipment alternately, swap the cable or
use an audio switch.
Volume adjustment
Press [l] or [r] on the remote control.
You can also adjust the volume with the configuration menu.
([Menu] button → "Setting" → "Volume") See
21
To Audio port
"Setting menu" on page
39.