Before Using The Remote Control; Using The Remote Control And Remote Operating Range - Epson EMP-52 User Manual

Before Using the Remote Control

Using the Remote Control and Remote Operating Range

When using the remote control for the first time, pull out the insulating tape that
is protruding from the battery holder. When the insulating tape is pulled out, the
remote control can then be used.
Using the Remote Control
The remote control is used in the following way.
Procedure
Point the remote control light-emitting area toward one of the
remote control light-receiving areas on the projector and operate
the remote control buttons.
Remote control
light-receiving
area (front)
Tip :
• Do not allow sunlight or light from fluorescent lamps to shine directly onto the
projector's remote control light-receiving areas, otherwise it may interfere with the
reception of signals from the remote control.
• When not using the remote control, place it into the remote control holder underneath
the projector so that it does not get lost.
Hook your fingers into the
handle in the base of the
remote control holder and pull
straight out.
Remote control
light-emitting area
Power
Computer S-Video/Video Color Mode
Menu A/V Mute Freeze
E-Zoom
Enter
Auto ESC
13
Remote control
light-receiving
Power
area (back)
Computer S-Video/Video Color Mode
Menu A/V Mute Freeze
E-Zoom
Enter
Auto ESC