Konica Minolta bizhub C452 Network Administrator's Manual page 292

2.63 Settings under "Fax Settings"
Item
Line 2 Default
Sender Name
[Edit]
[Delete]
Edit window
Item
No.
Sender Name
Reference
- The header position can be specified as required. If necessary, you can configure settings to prevent
sender information from being printed. For details, refer to page 2-259.
bizhub C652/C652DS/C552/C552DS/C452
Description
Specify the default sender name to be used for line 2.
If the sender name is not specified when sending a fax, the default specified
in this item is printed on an original.
This item is available when two optional fax kit FK-502 are installed while
"Sender Setting for each Line" is set to "ON" in "TX/RX Settings".
Displays the registered sender name.
Click this button to register or edit the sender name.
Click this button to delete the registered sender name.
Description
Displays the registration number.
Enter the sender name (up to 30 characters).
2
2-274