Konica Minolta bizhub C452 Network Administrator's Manual page 186

2.52 Using IEEE802.1X authentication
Item
EAP-Type
EAP-TTLS
anonymous
Inner Authentica-
tion Protocol
Server ID
Client Certificates
Encryption
Strength
Network Stop Time
Stop Time
bizhub C652/C652DS/C552/C552DS/C452
Description
Select an EAP authentication method.
If you select "Depend on Server", the EAP-Type provided
by the authentication server will be used for authentica-
tion. Configure the supplicant settings as required for this
machine according to the EAP-Type provided by the au-
thentication server.
Do not set this item to "OFF".
Configure settings for EAP-TTLS.
Enter an anonymous name to be used for EAP-TTLS au-
thentication (up to 128 characters).
This item is available if EAP-Type is set to "EAP-TTLS" or
"Depend on Server".
Select an EAP-TTLS inner authentication protocol.
This item is available if EAP-Type is set to "EAP-TTLS" or
"Depend on Server".
Enter a server ID (up to 64 characters).
This setting is required if you very the CN of the server cer-
tificate.
Select whether to encrypt authentication information us-
ing client certificates of this machine. You can configure
this setting when client certificates are registered in this
machine.
If EAP-Type is "EAP-TLS", the client certificates are al-
ways required.
This setting can be configured even if EAP-Type is set to
"EAP-TTLS" or "PEAP".
Select an encryption strength level for encrypted commu-
nication with TLS.
• Low: Keys of any length are used for communication.
• Mid: Keys that are more than 56 bits in length are used
for communication.
• High: Keys that are more than 128 bits in length are
used for communication.
This item is available if EAP-Type is set to anything other
than "OFF" or "EAP-MD5".
If an authentication process does not succeed within the
specified time, all network communication will stop. To
specify the delay between the start of an authentication
process and the stop of network communication, select
this box.
Specify the delay (sec.) between the start of an authenti-
cation process and the stop of network communication.
To restart the authentication process after network com-
munication has stopped, turn the main power of this ma-
chine off and on again.
2
Prior check
EAP authentication
method
Do you verify CN of
the server certifi-
cate?
2-168