2.26
Printing (LPR/Port9100)
2.26
Printing (LPR/Port9100)
Configure settings for LPR or Port9100 printing.
LPR printing is performed via the network using the LPR protocol. It is mainly used in UNIX-based operating
systems.
Port9100 printing is performed via the network by directly specifying the RAW port (Port9100) of this machine
connected to the TCP/IP network as a destination printer.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
LPD Setting
d
Reference
For details on how to install the printer driver, refer to the "User's Guide [Print Operations]".
2.26.1
TCP/IP Settings
Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-6.
2.26.2
LPD Setting
In the administrator mode of PageScope Web Connection, select "Network" ö "TCP/IP Setting" ö "TCP/IP
Setting".
Item
LPD
2.26.3
RAW Port Number
In the administrator mode of PageScope Web Connection, select "Network" ö "TCP/IP Setting" ö "TCP/IP
Setting".
Item
RAW Port Number
Reference
-
If you select [OK] after changing multiple port numbers together in PageScope Web Connection or on
the control panel, a port number duplication error may be displayed. When this error is displayed, first
change one port number and select [OK]. Then change another one and select [OK].
bizhub C652/C652DS/C552/C552DS/C452
(1)
Description
Select "Enable".
Description
Select the check box of the required port, and enter the
RAW port number.
TCP/IP Settings
(1) LPR printing
(2) Port9100 printing
Finish
2
(2)
RAW Port Number
Prior check
Prior check
2-91