Configuring Settings For The Fax Functions; Function On/Off Setting - Konica Minolta bizhub C452 Network Administrator's Manual

2.63 Settings under "Fax Settings"
Item
RX Setting for each
Line
Sender Setting for each
Line
2.63.4

Configuring settings for the fax functions

Configure settings related to the fax functions.

Function ON/OFF Setting

In the administrator mode of PageScope Web Connection, select "Fax Settings" ö "Function Setting" ö
"Function ON/OFF Setting".
Item
F-Code TX
Relay RX
Relay Printing
Destination Check Dis-
play Function
bizhub C652/C652DS/C552/C552DS/C452
Description
Specify whether to receive a fax for each line.
This item is available when two optional fax kit FK-502 are installed. This item
is not displayed when "Line 2 Setting" is set to "TX Only" in "Multi Line Set-
tings".
Specify whether to register sender information for each line.
This item is available when two optional fax kit FK-502 are installed. This item
is not displayed when "Line 2 Setting" is set to "RX Only" in "Multi Line Set-
tings".
Description
Select whether to use the F-code transmission function.
This function sends documents to a specific User Box of a remote machine by
entering the SUB address and the sender ID. To use the F-Code for transmis-
sion, the remote machine must support the F-Code function.
Select whether to use this machine as a relay distribution station.
A relay distribution station broadcasts documents received from a relay in-
struction station to the relay distribution destinations.
To use the relay distribution function, you must register a relay User Box.
Specify whether to print relayed documents after the relay distribution.
Select whether to display the list of the specified destinations when sending a
fax.
2
2-262