Preset Channel Scan; Switching Displays When Using The Xm Satellite Radio; Displaying The Xm Id - Eclipse CD3200 Owner's Manual

About the optional unit

Preset channel scan

This function enables the reception of all the
channels in the preset buttons for five seconds
each.
Press the [SELECT] (Down) button
1
for more than one second.
[P SCAN] will appear on the display,
and channels set in preset buttons [1]
through [6] will be received for five
seconds each.
To stop the preset scan mode at
2
the desired channel, press the
[SELECT] (Down) button again.
The main unit will stay tuned to the
desired channel.
Switching displays when using
the XM satellite radio
Press the [SCREEN/TEXT] button
1
for more than one second.
Each time the button is pressed the
display item changes in the following
order:
channel name
title name
→ →
ATTENTION
If there are no names, the "NO DATA"
message will appear.
90
→ category name
channel name
→

Displaying the XM ID

Displays the XM ID. The XM ID is necessary
when subscribing to programs, etc.
Press the [
1
more than one second.
The Menu selection mode is activated.
Press the [SELECT] (Up/Down)
2
button to select FUNC, and then
press the [ENTER] button.
Press the [SELECT] (Up/Down)
3
button to select XM ID.
4
Press the [ENTER] button.
The XM ID is displayed.
→
/MENU] button for