Registering A Cell Phone - Eclipse CD3200 Owner's Manual

Registering a cell phone

Cell phones can be registered in the main unit.
There are two methods that can be used to
register a cell phone in the main unit.
The cell phone itself can be used or search for
cell phones using the main unit. A maximum of
five cell phones can be registered in the main
unit. Priority of connection will always be in
sequential order from 1 to 5. As cell phones are
added and deleted, the order will always go by
the numbered sequence.
Registering using a cell phone
If a cell phone is currently connected, it must be
disconnected prior to registration of additional
cell phones.
Press the [SELECT] (Up/Down) to
1
select Registration within the
Phone Setting mode.
Press the [ENTER] button.
2
ATTENTION
NO ENTRY will be displayed if available. If not,
a double beep will be heard if the phone
registration memory is not available or full.
Press the [SELECT] (Up/Down)
3
button to select Allow Connect.
Press the [ENTER] button.
4
The "Waiting" message appears on
the display.
Use the cell phone to input the
5
passcode.
The default passcode is 1234.
ATTENTION
• For details on how to operate the cell
phone, read its instruction manual.
The Bluetooth hands-free function
• Be sure to perform the registration of the
cell phone only while the "Waiting" message
is on the display.
When the registration has been
6
completed, the "COMPLETED"
message appears on the display.
The cell phone is now registered to the
main unit
( and appear on the display.)
If the registration has not been
successfully completed, the "FAILED"
message appears on the display.
Repeat the registration procedure.
ATTENTION
• To register another cell phone to the main
unit, press the [RTN/BAND] button twice
after Step 6. Perform the registration
procedure from the registered cell phone
selection mode in Step 1.
• You cannot register a cell phone that has
already been registered.
• The hands-free function and the audio
function of the cell phone can be connected
at the same time for some cell phones.
Searching for cell phones to be
registered
Press the [SELECT] (Up/Down) to
1
select Registration within the
Phone Setting mode.
Press the [ENTER] button.
2
ATTENTION
NO ENTRY will be displayed if available. If not,
a double beep will be heard if the phone
registration memory is not available or full.
IX
53