Connecting The Main Unit And The Portable Device; Disconnecting The Main Unit And The Portable Device - Eclipse CD3200 Owner's Manual

Press the [RTN/BAND] button.
4
The portable device is set as a
Bluetooth audio source.
ATTENTION
• The Bluetooth audio (BT-Audio) function
can only be selected in the audio mode
when the BT Audio Set selection mode is
set to ON.
• The default setting for the Bluetooth audio
mode is OFF (BT-Audio
disabled).
Connecting the main unit and the
portable device
Press the [SELECT] (Up/Down)
1
button while in the BT-Audio Set
selection mode to select Connect.
Press the [ENTER] button.
2
The "Waiting" message appears on
the display.
ATTENTION
Press the [RTN/BAND] button to change the
portable device to be connected. The BT-
Audio Set selection mode is activated again.
Input the passcode using the
3
portable device.
The default setting value of the
passcode is 1234.
ATTENTION
• For details on how to operate the portable
device, read its instruction manual.
• Be sure to perform the connection of the
portable device only while the "Waiting"
message is on the display.
4
selection is
• If the portable device is still connected,
disconnect it.
• If the connection has not been successfully
completed, and the "FAILED" message
appears
portable
procedure from the BT Audio Set selection
mode in Step 1.
• The passcode is a password used when
connecting the portable device to the main
unit.
• When the audio of the cell phone is
connected, hands-free can be connected at
the same time for some devices. If you want
to be able to use the hands-free function,
perform
procedure again.
Disconnecting the main unit and the
portable device
1
2
The Bluetooth audio function
When the connection has been
completed, the "COMPLETED"
message appears on the display.
The portable device is now connected
to the main unit.
( and appear on the display.)
If the connection has not been
successfully completed, the "FAILED"
message appears on the display.
ATTENTION
on the display,
device again,
the hands-free
Press the [SELECT] (Up/Down)
button while in the BT Audio Set
selection mode to select
Disconnect.
Press the [ENTER] button.
The "Disconnect ?" message appears
on the display.
VI
connect the
following the
connection
39