Position Selector; Crossover Adjustment (X-Over) - Eclipse CD3200 Owner's Manual

Various Settings
Press the [SELECT] (Up/Down)
2
button to adjust the Q curve
pattern.
Each time the button is pressed, the Q
curve pattern changes in the following
order.
When BASS is selected:
WIDE ↔ MidWIDE ↔ NORMAL ↔
NARROW ↔ WIDE ↔
When MIDDLE is selected:
NORMAL ↔ NARROW ↔ NORMAL ↔
When TREBLE is selected:
NORMAL (Fixed)
Press the [SELECT] (Right/Left)
3
button to adjust the frequency.
Each time the button is pressed, the
frequency changes in the following
order.
When BASS is selected:
60Hz ↔ 80Hz ↔ 100Hz ↔ 120Hz ↔
60Hz ↔
When MIDDLE is selected:
700Hz (fixed)
When TREBLE is selected:
7.5kHz ↔ 10kHz ↔ 12.5kHz ↔ 15kHz
↔ 7.5kHz ↔
ATTENTION
• The median frequency and the Q curve you
set are used for BASS, MIDDLE and
TREBLE in the audio control mode. (For
details, Refer to "How to operate the AUDIO
CONTROL" on page 64.)
• When the median frequency and the Q
curve are adjusted, CUSTOM EQ is also
updated.
70

Position selector

The sound field can be adjusted for the listener's
seat position.
Press the [SELECT] (Up/Down)
1
button to select Position Sel.
2
Press the [ENTER] button.
The position selector setting mode is
activated.
Press the [ENTER] or [SELECT]
3
(Up/Down/Right/Left) button to
select the position you want.
When each button is pressed, the
position is changed as follows.
ENTER:
OFF
Up:
FRONT
Down:
REAR
Right:
FRONT-RIGHT
Left:
FRONT-LEFT

Crossover adjustment (X-Over)

Specified frequency bands are allocated to each
speaker for improved sound integration.
Press the [SELECT] (Up/Down)
1
button to select the X-Over.
2
Press the [ENTER] button.
The crossover
activated.
setting mode is